POLYFLEX DS - available for asphalt or concrete

PRODUCT DESCRIPTION

 PolyFlex DS repairs set up to a more flexible repair. PFDS is ideal where there is a lot of motion in the pavement. The polymer comes in black or gray and can be topped with gray or black sand to match your pavement. Make sure the crack is clean and free of moisture. If there is a lot of water, use a blow dryer or torch to make certain the crack is dry. Open cartridge and squeeze PFDS directly into the crack. Use a scraper or straight-edge to smooth the material out. Wipe up any excess material and allow to dry for 30 minutes. Now the crack is filled and ready for use. Roklin’s long-lasting solution is complete with almost no preparation and little drying time.

PolyFlex DS Rapid Concrete & Asphalt Crack Repair Single 21oz. Cartridge Contains:

  • (1) Dual Cartridge side A and side B.
  • (1) Spiral Bell Static Mixer
  • (1) SDS

IMPORTANT FACTS

 

  • Includes one static mixer per cartridge.
  • Low-viscosity, fast-reacting urethane polymer, cures in minutes not hours.
  • It penetrates into small cracks and forms a high-strength adhesive bond.
  • Flows underneath crack or spall concrete and seal the base against further problems.
  • You can order additional static mixers 
  • Hand Operated Dual Cartridge Gun is not included.

DIRECT CRACK INJECTION

Deep penetrating crack fill. NOT A SURFACE TACK COATING LIKE OTHER PRODUCTS.


Available for purchase as a single 21oz cartridge, a case of 12 cartrdges or for experienced applications in 1 gallon jugs